Rainwater Harvesting and Storage
This technical guide explains how to collect and store rainwater or runoff to supplement irrigation at the field school and reduce pressure on existing water resources.
Objective:
Collect and store rainwater or runoff to provide an additional source of irrigation water for the field school and reduce pressure on existing water resources.
Principle:
Rainwater is channelled into a watertight pond for temporary storage before use, with the system designed to suit the terrain, the size of the catchment area, crop water needs and local conditions.
Implementation – Key Steps
- Choose a stable, accessible site where runoff can be collected without causing erosion.
- Build a watertight pond using a suitable liner or masonry construction, and secure the area around it.
- If needed, include a settling area and a simple filter to remove debris.
- Arrange for water to be drawn from the pond and delivered to the plots while minimising losses.
- Check regularly for leaks and sediment build-up, and inspect the appearance of the water.
Precautions and Practical Advice:
Avoid collecting water from contaminated areas, secure the pond to prevent falls and keep animals and waste out, and have a qualified person approve the dimensions and safety measures suited to the site.
Benefits for Climate Adaptation:
Rainwater harvesting conserves water, improves water availability during dry periods and helps crops withstand dry conditions.
Indicative Investment Cost:
The cost depends on the pond’s capacity, the waterproofing method and the work required.
LESSONS FROM THE AIN LAHJAR ASSOCIATION’S EXPERIENCE
As part of the project, the Ain Lahjar Association installed a rainwater harvesting pond to supplement irrigation at the field school, demonstrating how an additional water supply can be collected and stored in a pond that must be sized and maintained to suit the site.
Comments
Share your experience or ask a question about this article.
Loading comments…